Can I enter?

Визы и требования для въезда — 199 паспортов · 39 402 маршрутов

Can I enter?

Выберите паспорт и страну назначения — и узнаете правило, разрешённый срок пребывания и то, что нужно подготовить до вылета. Пять бесплатных проверок в день, без регистрации.

Ещё параметры

Эти документы могут дать право на освобождение — если страна назначения такое предусматривает; сами по себе они никогда не меняют базовый визовый вердикт. Даты проверяются прямо в вашем браузере — по разрешённому сроку пребывания и по правилу страны назначения о сроке действия паспорта: ничего из введённого здесь не передаётся вместе с запросом на проверку.

5 бесплатных проверок в день, без аккаунта

Подтвердите, что вы человек, и получите 20 проверок в день

Куда дальше · Доверие и прозрачность · Разработчикам и агентам: та же проверка в виде HTTP-запроса

02 — Доверие и прозрачность

Все цифры — из самого набора данных

Каждый показатель ниже вычислен по тому же набору данных, который отдаёт этот сервис: ни одна цифра не вписана руками. Каждое правило въезда ежедневно перепроверяется по указанному официальному источнику, а счётчики приходят напрямую с рабочих серверов и обновляются каждые пять минут.

199

Охвачено паспортов

39 402

Маршруты «паспорт — направление»

191/199

Сверено с официальными источниками

827

Правила со ссылками на источники

71

Правила, перепроверенные сегодня

538

Официальных источников проверяется ежедневно

0d

Медианное время с последней сверки

2026-08-12

Версия набора данных

Доступность API · 30 дней

172/199

Ссылок на официальные сайты для подачи заявлений

Визитов ИИ-агентов сегодня

Вызовов инструментов MCP · всего

Активность сверок

  • AGOSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • ARESources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • ATGSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • AUSSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • AUTPassport-validity, blank-pages, onward-ticket, residence-permit-exemption and purpose-scope rules re-read against oesterreich.gv.at and bmeia.gv.at, all unchanged; the flagged content-hash change was a cosmetic page-furniture update.
  • BHRSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • BIHSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • BTNPassport-validity, sustainable-development-fee and purpose-scope rules re-read against doi.gov.bt and bhutan.travel, all unchanged.
  • CANPassport, blank-pages, health, TWOV, residence-permit-exemption and purpose-scope rules re-read against canada.ca, all unchanged; the flagged eta.html hash change was a transient scheduled-maintenance banner.
  • CHLFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CHNFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CIVFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CMRFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CODFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • COGFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • COLSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • COMFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CPVTourist-visa duration corrected from a flat 30-day cap to 90 days (extendable once to 180); transit visa corrected to 4 days; added the EASE pre-registration and TSA airport-tax requirement that applies even to visa-exempt travellers. Passport-validity and onward-ticket reconfirmed unchanged.
  • CRISources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • CUBFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • CYPDeep audit: blank-pages, airport-transit-visa and two of three residence-permit-exemption clauses reconfirmed unchanged, and the third clause's excluded-country list corrected to 'except the UK and Ireland' (was 'except Ireland'); passport-validity flagged needs_review because the cited embassy page states two different anchors for the 3-month buffer (beyond the visa's validity in one section, beyond the trip in another) without reconciling them.
  • CZEFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • DEUFull deep audit: every populated field (passport validity, onward ticket, TWOV, residence-permit exemptions, purpose scope where applicable) re-read against live official sources and found accurate.
  • GABSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • GINSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • HUNSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • INDPassport-validity, blank-pages, onward-ticket and purpose-scope rules re-read against indianembassyusa.gov.in and indianvisaonline.gov.in, all unchanged; the flagged hash change was a page-footer date edit.
  • IRNSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • IRQPassport-validity, blank-pages, onward-ticket and purpose-scope rules re-read against UK FCDO and the Iraqi MOFA, all unchanged.
  • KHMSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • LCAPassport-validity and purpose-scope rules re-read against stlucia.org and govt.lc, unchanged.
  • LSOBlank-pages rule flagged needs_review: the cited source states the 3-clean-pages requirement specifically for trade-purpose visas, while the general embassy visa-requirements list has no blank-pages item at all. Passport-validity, onward-ticket, health and purpose-scope reconfirmed unchanged.
  • MDASources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • MNGSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • MOZSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • MUSSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • MYSSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • NAMBlank-pages note corrected: both current MHAISS documents require 3 clean pages uniformly; the prior note's claim of a 2-page exception for online applications was not supported by either source. Passport-validity, onward-ticket, health and purpose-scope reconfirmed unchanged.
  • NGASources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).
  • NPLSources previously flagged unreachable were retried and loaded successfully; live official content matches the stored rules unchanged (prior failures were sandbox/proxy artifacts, not real outages).

Полные данные в машиночитаемом виде: GET /transparency · GET /stats.json · GET /changes.json · status.canienter.com

03 — Интеграция

Ответ с оплатой за запрос.

Неоплаченный вызов возвращает HTTP 402 с инструкциями по оплате. Любой клиент x402 платит $0.03 в USDC и повторяет запрос. Расчёты проходят в сети Base mainnet.

# Free tier — 5 checks a day, no auth
curl "https://api.canienter.com/free/check?passport=NLD&destination=JPN"

# Paid tier — answers HTTP 402 Payment Required. The offer (amount,
# asset, pay-to) is base64 JSON in the PAYMENT-REQUIRED header;
# any x402 client settles it and retries automatically.
curl "https://api.canienter.com/v1/check?passport=NLD&destination=JPN"

# Peek at the offer without paying:
curl -s -o /dev/null -D - "https://api.canienter.com/v1/check?passport=NLD&destination=JPN" \
  | grep -i "^payment-required" | cut -d" " -f2 | base64 -d
// npm i @x402/fetch @x402/evm viem   (Node 18+)
// WARNING: running this spends real USDC ($0.03/call, Base mainnet).
// Inspect the offer first, free of charge:
const probe = await fetch("https://api.canienter.com/v1/check?passport=NLD&destination=JPN");
console.log(probe.status, /* 402 */ JSON.parse(atob(probe.headers.get("PAYMENT-REQUIRED"))));

// Then pay per call — key from an env var, never hardcoded or logged:
import { wrapFetchWithPaymentFromConfig } from "@x402/fetch";
import { ExactEvmScheme } from "@x402/evm";
import { privateKeyToAccount } from "viem/accounts";

const account = privateKeyToAccount(process.env.X402_PRIVATE_KEY);
const payFetch = wrapFetchWithPaymentFromConfig(fetch, { schemes: [
  { network: "eip155:8453", client: new ExactEvmScheme(account) }]});

const res = await payFetch(
  "https://api.canienter.com/v1/check?passport=NLD&destination=JPN");
if (!res.ok) throw new Error("check failed: " + res.status);
const { requirement, allowed_stay_days } = await res.json();
# The API publishes its own agent skill (Claude Code paths shown;
# Codex/Cursor/other agents: use your agent's skills directory)
mkdir -p ~/.claude/skills/visa-check
curl -s "https://api.canienter.com/.well-known/agent-skills/visa-check/SKILL.md" \
  -o ~/.claude/skills/visa-check/SKILL.md

# Discovery index with the SKILL.md sha256 digest (verify, updates, extras):
curl -s "https://api.canienter.com/.well-known/agent-skills/index.json"

# Remove: delete ~/.claude/skills/visa-check

Навык позволяет агенту узнавать требования для въезда и платить за каждый запрос через x402. Никаких API-ключей, которые могли бы утечь.

Машиночитаемая документация: GET /llms.txt · GET /openapi.json

Добавить в агента

ЭндпоинтЦена
/free/checkбесплатно · 5/день
/v1/check$0.03
/v1/trips/evaluateвся поездка: несколько сегментов, несколько паспортов, пояснения$0.10
/v1/passport/{iso3}все 198 направлений сразу$0.15
  • USDC в Base mainnet · x402 v2
  • Без аккаунта, ключа API и договора
  • Дата актуальности в каждом ответе

01 — Запрос

GET /v1/check: неоплаченный запрос возвращает HTTP 402 с условиями оплаты.

02 — Оплата

$0.03 USDC через любой клиент x402, расчёт в Base mainnet.

03 — Ответ

JSON verdict и ончейн-квитанция об оплате.

Не разработчик? Те же ответы можно показать у себя на сайте — достаточно двух строк HTML: без вызовов API и без регистрации.

04 — Ваш сайт

Работает и на ваших страницах.

Путеводитель, блог о переезде, процесс бронирования: вставьте две строки — и ваши читатели получат требование, разрешённый срок пребывания и ссылку на правила с источниками, не уходя с вашей страницы. Это бесплатно для любого сайта, коммерческого или нет. Единственное условие — ссылка на источник должна оставаться видимой.

<!-- anywhere in your page -->
<div data-canienter-widget></div>
<script src="https://canienter.com/embed.js" async></script>

<!-- on a Japan guide, pre-select the destination -->
<div data-canienter-widget data-destination="JPN"></div>
  • Без cookie, отслеживания и аккаунта
  • Подстраивается под светлую и тёмную тему сайта
  • Автоматически подстраивается под контейнер
  • Ответы ссылаются на те же официальные источники

Документация виджета, параметры и рабочий пример · Для разработчиков